Aluminium Sliding Doors in Sydney, Supplied and Installed
The Strong & Stylish Solution
Is your sliding door sticking, rattling in the wind or letting the winter draught in? Select Windows supplies and installs made-to-measure aluminium sliding doors across Sydney, with one consultant looking after your job from the first measure to the final check.
What are aluminium sliding doors?
Aluminium sliding doors are glazed doors with an aluminium frame, where one or more glass panels glide sideways along a track instead of swinging open. Because nothing swings into the room, they suit tight patios, balconies and living areas. Aluminium keeps the frame slim and strong, so more of the opening is glass.
A typical door has a fixed panel and a sliding panel that runs on rollers in the bottom track. The panels overlap at an interlocker, which seals the join when the door closes. Weather seals run around the sash, and the sill is shaped to drain water outside.
This page covers aluminium frames only. For an overview of every sliding door type we install, see our sliding glass doors in Sydney page.
Signs your sliding door is ready to replace
Most people start looking at new sliding doors because the old one has started to fight them. Common triggers we see across Sydney homes:
The door drags, jumps off the track or needs two hands to open.
Water pools inside the sill after heavy rain.
You can feel cold air or hear traffic around the closed door.
The lock no longer lines up, or the door can be lifted when closed.
The frame is pitted, chalky or corroded, which is common near the beach.
The glass is single glazed and the room overheats in summer or chills in winter.
Repair or replace?
If the frame is sound and only the rollers or lock are worn, a repair may be enough, and we will tell you so. Replacement makes more sense when the frame is corroded or bent, the track is damaged, water is getting in through the sill, or you want better glass, security or a wider opening. Our guide on what you need to know about door replacement walks through the decision in more detail.
Why aluminium suits Sydney sliding doors
Aluminium is the most common frame material for sliding doors in Australia because it is strong for its weight, does not rot or swell, and keeps the opening square for years when the door is installed level and square.
Low maintenance
Wipe the frame and vacuum the track. No sanding or repainting.
Stable
Aluminium does not swell in humid weather, so the door keeps running freely.
Slim sightlines
More glass, more light, a clearer view of the garden or harbour.
Colour choice
Powder coated or anodised to match your home.
Glazing flexibility
Frames can carry safety glass, laminated glass or double glazing.
The trade-off is heat. Standard aluminium conducts heat more readily than timber, so glass choice matters more. That is covered in the glass section below.
Coastal and Northern Beaches homes
Salt air is hard on any metal. On coastal sites from Manly to Palm Beach, the finish, the hardware and regular rinsing make the difference between a frame that lasts and one that pits. We will talk you through finish options for your exposure and point you to our guide on caring for your doors.
Bushfire-prone blocks
If your home backs onto bushland, your door may need to meet a Bushfire Attack Level (BAL) under AS 3959. Select supplies BAL40-rated products with Pyro-protect seals, tested by the CSIRO to withstand up to 40 kW/m² of radiant heat. [CONFIRM: which aluminium sliding door configurations are available at BAL40 and lower BAL levels.] Your BAL assessment tells us what the door must achieve.
Apartments, unit blocks and strata
Aluminium sliding doors are the standard balcony door in Sydney apartments. Replacing them across a building needs consistent appearance, safe working at height and a committee that understands the options. Our representatives attend strata meetings with product samples, and every installation meets fall prevention requirements. See our unit block window and door replacement service for whole-building projects run.
Configurations, frames and finishes
Every door is made to measure for your opening, so you are not forcing a standard size into a non-standard wall.
Panel configurations
| Configuration | How it works | Suits |
|---|---|---|
| Two-panel | One fixed panel, one sliding panel | Most patio and balcony openings |
| Three-panel | A sliding panel passes a fixed panel on each side, or two panels slide | Wider living room openings |
| Four-panel | Two centre panels slide apart past two fixed panels | Wide openings that need a central entry |
| Sliding door with fixed sidelights or highlights | Extra fixed glass beside or above the door | Openings with more wall to fill |
Maximum panel sizes depend on the frame system, glass weight and your site's wind rating. [ADD: maximum width and height for the Synergy and Quantum systems.] For openings where you want most of the width to clear, an aluminium stacking door is usually the better option.
Synergy and Quantum frame options
We install the Synergy and Quantum aluminium sliding door ranges, which use heavier semi-commercial profiles for added strength and larger panels. [ADD: one line on what separates Synergy from Quantum, using the system supplier name.] Because we are independent installers rather than a single-brand factory, we recommend the system that suits your opening, exposure and budget.
Colours and finishes
Frames come in powder coated or anodised finishes. Powder coating gives a wide colour range, from white and off-white to charcoal and black. Anodising produces a hard metallic finish that suits some coastal and modern homes. [ADD: standard colour list and any coastal-grade finish options.] The easiest way to choose is to see the samples in our Brookvale showroom.
Glass options for aluminium sliding doors
Glass in a door must be safety glass. Under AS 1288, the Australian Standard for glass in buildings, doors need Grade A safety glass to reduce injury risk if someone walks into the panel. Beyond that baseline, you choose glass for comfort, noise and security.
| Glass type | What it does | Consider it when |
|---|---|---|
| Toughened safety glass | Breaks into small blunt pieces | Standard choice for most doors |
| Laminated safety glass | Holds together when broken, cuts some noise and UV | Security, street noise, ground-floor doors |
| Double glazing | Two panes with a sealed gap that slows heat and sound | Living areas, west-facing doors, busy roads |
| Low-E glass | Coating that reduces heat gain and loss | Large doors in full sun |
| Tinted or obscure glass | Cuts glare or adds privacy | Bathrooms, street-facing doors |
Are double glazed aluminium sliding doors worth it? For a large sliding door in a living area, often yes. A sliding door is usually the biggest piece of glass in the room, so it has an outsized effect on comfort and noise. Our aluminium door frames carry double glazed units, and our double glazing page explains the sound and energy benefits in more depth.
Security, screens and hardware
Locks
Robust locking hardware, with keyed options available. [CONFIRM: whether multi-point locks are standard or an upgrade.]
Anti-lift features
Stop the sliding panel from being lifted off the track when closed.
Heavy-duty rollers and tracks
Keep large, heavy glass panels gliding smoothly.
Screens
Sliding flyscreens or security screens fit into the door system, so you can leave it open for air.
Handles
A range of styles and finishes, shown on our door hardware page.
Sliding, stacking or bi-fold? Aluminium or timber?
| Door type | Opening when fully open | Space needed | Best for |
|---|---|---|---|
| Aluminium sliding door | About half the frame width (two-panel) | None beyond the wall | Patios, balconies, tight rooms |
| Stacking door | Most of the width as panels stack behind each other | None beyond the wall | Wide openings to a deck |
| Bi-fold door | Nearly the full width | Room for panels to fold out or in | Entertaining areas wanting a fully open wall |
| Frame material | Aluminium | Timber |
|---|---|---|
| Maintenance | Wipe and vacuum the track | Recoat or reseal every few years |
| Look | Slim, modern | Warm, traditional or natural |
| Heat transfer | Higher unless double glazed or thermally broken | Naturally insulating |
| Moisture | Does not rot or swell | Needs protective finish |
| Typical cost | Generally lower for the same size | Generally higher |
If the look of natural timber matters most, compare our timber sliding doors in Sydney. Many homes use aluminium at the back and timber where the joinery shows.
How we install aluminium sliding doors
One consultant stays with your job from quote to handover, so you are never re-explaining your project to someone new.
Free measure and quote
Your consultant measures the opening, checks the sill and wall, and talks through what you want. [ADD: typical wait for a measure appointment.]
Showroom visit (optional)
Open and close real doors, compare frames and see colour samples in Brookvale.
Selection
You choose configuration, glass, finish, screens and hardware, matched to your noise, sun, coastal or bushfire conditions.
Check measure
Before anything is ordered, the opening is measured again so the door is made to fit. [ADD: typical lead time from order to installation.]
Installation
Our carpentry-trained crew removes the old door, levels and seals the sill, fits and adjusts the frame and panels, and cleans up. A site supervisor is on site daily for larger jobs. [CONFIRM: a standard single door is usually installed in one day.]
Handover and follow-up
We check the roller action, locks and seals with you, then follow up after installation. Your installation is backed by our 10-year workmanship warranty.
Why sliding doors fail after installation
Most sliding door complaints are installation problems, not product problems. A sill that is not level makes the door drift or drag. A track that is not packed and supported sags under heavy glass. Missing flashing or blocked drainage lets water in during a southerly. Our crews come from carpentry and building backgrounds and are employees or long-term contractors, not a rotating subcontractor pool, so these details are checked on every job.
What to check before you choose an installer
These questions are worth asking any company, including us:
Is the business licensed? Check the NSW Builder Licence number on the quote. Ours is 198197C.
Who will install the door: employees, long-term crews or whoever is free that week?
What does the warranty cover, for how long, and is it for workmanship as well as product?
Is removal of the old door, disposal and making good included in the price?
Will the door be made to measure after a check measure, or forced into a standard size?
Can you see and operate the product before you buy?
Australian standards and wind ratings
External sliding glass doors fall under AS 2047, the Australian Standard for windows and external glazed doors in buildings. A compliant door carries a label showing its wind and water performance, and that rating must suit your site's wind classification. Many suburban Sydney homes sit in N2 or N3, while exposed coastal and elevated sites can be higher. The HIA has a plain-English summary of AS 2047 windows and external glazed doors. [CONFIRM: wind ratings achieved by the Synergy and Quantum doors.]
Why choose Select Windows for aluminium sliding doors
One person handles it all
Your consultant stays with you from quote through check measure, installation and follow-up. No hand-offs between sales, factory and install crew.
Installers with building backgrounds
Carpentry-trained crews who understand what sits around the door frame, not just the door.
10-year workmanship warranty
Every installation is covered for a decade.
Licensed and insured
NSW Builder Lic. 198197C, fully insured, and members of the Australian Window Association and the Housing Industry Association.
Independent, not tied to one factory
We choose the system that suits your opening rather than the only one we make.
Operating since 2007
with over 50 years of combined team experience.
[ADD: 2 to 3 project photos of completed aluminium sliding door installations with suburb names, and one short case snapshot: situation, what we did, result.] Read more in our customer testimonials and see completed work in the project gallery.
Try them at our Brookvale showroom
A sliding door is something you need to feel. Visit our interactive showroom at 1/23–25 Carter Rd, Brookvale NSW 2100 to slide the panels, check the locks and compare frame colours side by side.
Showroom hours: Monday to Friday 8:30am to 5:00pm, Saturday 8:30am to 12 noon (closed long weekend Saturdays).
We install aluminium sliding doors across Sydney, including the Northern Beaches, North Shore, Eastern Suburbs, Inner West and Hills District. [CONFIRM: preferred list of service regions.] For office and retail projects, see our commercial windows and doors service.
Related doors
Sliding glass doors: the full range of sliding door options.
Timber sliding doors: natural timber frames for warmth and character.
Aluminium stacking doors: wider openings with panels that stack.
Bi-fold doors: an almost fully open door for entertaining.
All aluminium doors: hinged, sliding, stacking and bi-fold options.
Aluminium sliding doors FAQs
How long do aluminium sliding doors last?
A well-installed aluminium sliding door can last for decades. Aluminium does not rot, swell or crack, so the frame usually outlives the moving parts. Rollers and seals wear with use and can be replaced. Rinsing coastal salt off the frame and keeping the track clean extends the life of both the finish and the hardware.
Can you fit a new aluminium sliding door into my existing opening?
Usually, yes. Because each door is made to measure, it is built to suit your existing opening, so major building work is often avoided. During the measure we check the sill, the wall structure and any rot or damage around the old frame. If the opening needs repair or widening, we explain this before you commit.
How long does installation take?
[CONFIRM: A standard aluminium sliding door is usually installed in one day once it has been made.] Larger multi-panel doors, upper-floor balconies and openings needing repair take longer. Lead time from order to installation depends on the frame system, glass and colour, and your consultant gives you a confirmed date after the check measure.
Do I need council approval to replace a sliding door in NSW?
Replacing a door in the same opening can often be done without a development application, but heritage items, conservation areas and changes to the opening size have extra rules. Strata owners also need owners corporation approval. Check with your council or strata manager; we flag anything we notice at the measure.
Are double glazed aluminium sliding doors worth it?
For a large door in a living area, they are often worth it. Double glazing slows heat moving through the glass and cuts outside noise, which matters because a sliding door is often the largest area of glass in the room. It suits west-facing rooms, homes near busy roads and anyone tired of a cold lounge room in July.
Can I add a flyscreen or security screen?
Yes. Our aluminium sliding door systems are designed to take sliding flyscreens or security screens, so you can leave the door open for airflow without letting insects in. Screens are made to match the door frame colour and can be included in your quote at the measure.
What warranty do you offer?
All Select Windows aluminium door installations are backed by our 10-year workmanship warranty. Product warranties for the frame, glass and hardware are provided by the manufacturers, and your consultant explains them in your quote. These warranties sit alongside your rights under the Australian Consumer Law. [ADD: product and moving-parts warranty periods.]
Are aluminium sliding doors secure?
Modern aluminium sliding doors are fitted with robust locks and anti-lift features that stop the panel being lifted off the track. Laminated glass and a security screen add further protection. On ground-floor and street-facing doors, ask us about keyed locks and laminated glass when you choose your options.
Book a free measure and quote for aluminium sliding doors
Tell us about your opening and we will arrange a free, no-obligation measure and quote anywhere in Sydney. One consultant, one point of contact, and a 10-year workmanship warranty on the finished job.
Select Windows & Doors · 1/23–25 Carter Rd, Brookvale NSW 2100 · 02 9938 1500 · sales@selectwindows.com.au · NSW Builder Lic. 198197C